Make a vintage jewelry Christmas tree

 Christmas is a very special day for all Christians as it is a day they commemorate and honor Jesus Christ’s birth. The day is always a sacred religious holiday. People celebrate this day like no other, and that’s why the day is always full of decoration. People even tend to buy a Christmas tree, which sometimes proves to be costly. However, if you adore having a Christmas tree during this particular day, and cannot afford to buy one, there is an easier and a cheaper way for you. You can now make a wholesale vintage jewelry Christmas tree. By doing this, you will be adding your personal collections of antique decorations.

Find the boxes with old family vintage jewelry, or scour garage sales for vintage necklaces, earrings, bracelets and brooches with rhinestone and bead embellishment. Making a Christmas tree made of wholesale jewelry from China is not only easy. Bu also can act as a fun activity for the entire family.
Things required to make the project a success

• Newspaper
• Pencil and a ruler
• 12-inch Styrofoam cone
• 18-inch square green velvet
• Tailor’s chalk
• Scissors
• Craft glue
• Paint brush
• Hot glue gun
• Wire cutters

Steps to follow when making the vintage jewelry Christmas tree

1. Lay the newspaper’s sheet on the craft table, and place the Styrofoam cone on its side at the center of the paper. At the cone’s bottom edge, put the pencil’s point on the newspaper. Make a full rotation of the cone. Make sure you trace along the bottom of the cone during the rolling process and add a half inch to each line end. Repeat the same process at the top of the cone. Attach the ends from the upper and lower line tracing as you cut out the pattern.
2. Pin the pattern to the square green velvet as you cut out. And a half-inch to both the top and bottom edges of the pattern. Make the cone stand at the remaining part of the velvet, as you use the chalk to draw around it. Just inside the chalk line, cut the circle as this will make the tree’s base.
3. Using the paint brush, apply the glue to the cone’s side surface. With the wrong side of the velvet tree shape up, lay it on the table and put the cone in velvet’s center. Apply the craft glue on the velvet and then wrap it around the cone.
4. Around top and the bottom edges, and from the velvet’s edge to the cone’s edge, clip a half-inch wide slits. Apply the glue to the velvet slit’s wrong side, and fold the slits over the cone’s top point and the bottom base. On the wrong side outer edges of the circle, apply a bead of craft glue. With the glue side facing down, place the velvet circle on Christmas tree base bottom, as you allow the glue to dry.
5. Use the wire cutters to cut the earring clips and pin backs from you wholesale vintage jewelry. Apply the hot glue to jewelry’s back. Arrange the backs on the side of the cone-shaped Christmas tree. Use small charms and beads to cover the surface filling the gaps. To finish up making the vintage jewelry Christmas tree, glue a rhinestone brooch on the tree’s top.

Conclusion
It is important that you celebrate your Christmas full of joy. However, you can’t achieve this if your home’s decoration isn’t perfect. Now, with the steps, you can find a way of making your home lively and full of decoration with the vintage jewelry Christmas tree.